logging console
The logging console Global Configuration mode command limits messages logged to the console based on
severity. To disable logging to the console, use the no form of this command.
Syntax
logging console level
no logging console
Parameters
•
level — Specifies the severity level of logged messages displayed on the console. Possible values: emergen-
cies, alerts, critical, errors, warnings, notifications, informational, debugging.
Default Configuration
The default severity level is informational.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example limits logging messages displayed on the console to severity level errors.
Console(config)# logging console
errors
TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family CLI Reference Guide
To Next Page
Loading...
