TP-Link TL-SG3109 - Show Privilege

show privilege
The show privilege Privileged/User EXEC mode command displays the current privilege level.
Syntax
show privilege
Default Configuration
This command has no default configuration.
Command Mode
Privileged and User EXEC modes
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the current privilege level for the Privileged EXEC mode.
Console# show privilege
Current privilege level is 15
TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family CLI Reference Guide
Page 285