vlan
Use the vlan VLAN Configuration mode command to create a VLAN. To delete a VLAN, use the no form of this
command.
Syntax
vlan vlan-range
no vlan vlan-range
Parameters
•
vlan-range — Specifies a list of VLAN IDs to be added. Separate nonconsecutive VLAN IDs with a comma
and no spaces; a hyphen designates a range of IDs.
Default Configuration
This command has no default configuration.
Command Mode
VLAN Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example VLAN number 1972 is created.
Console(config)# vlan database
Console(config-vlan)# vlan 1972
TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family CLI Reference Guide
To Next Page
Loading...
