show vlan internal usage
The show vlan internal usage Privileged EXEC mode command displays a list of VLANs used internally by the
device.
Syntax
show vlan internal usage
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays VLANs used internally by the device.
Console#
show vlan internal usage
Usage VLAN Reserved IP address
--------- ---- -------- ----------
Eth 3 1007 No Active
Eth 4 1008 Yes Inactive
Eth 3 1009 Yes Active
TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family CLI Reference Guide
To Next Page
Loading...
