TP-Link TL-SG3109 - Ip Http Exec-Timeout

ip http exec-timeout
The ip http exec-timeout Global Configuration mode command specifies the timeout interval of a http session.
To return to the default configuration, use the no form of this command.
Syntax
ip http exec-timeout minutes [seconds]
no ip http exec-timeout
Parameters
•
minutes — Specifies the number of minutes. (Range: 0 - 65535)
• seconds — Specifies additional time intervals in seconds. (Range: 0 - 59)
Default Configuration
The default configuration is 10 minutes.
Command Mode
Global Configuration mode
User Guidelines
To specify no timeout, enter the ip http exec-timeout 0 command.
Examples
The following example configures the timeout interval to 5 minutes.
Console(config)# ip http exec-timeout 5
TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family CLI Reference Guide
Page 308