TP-Link TL-SG3109 - Dot1 X System-Auth-Control

dot1x system-auth-control
The dot1x system-auth-control Global Configuration mode command enables 802.1x globally. To return to the
default configuration, use the no form of this command.
Syntax
dot1x system-auth-control
no dot1x system-auth-control
Default Configuration
802.1x is disabled globally.
Command Modes
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example enables 802.1x globally.
Console(config)# dot1x system-auth-control
TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family CLI Reference Guide
Page 314