show ports security
The show ports security Privileged EXEC mode command displays the port-lock status.
Syntax
show ports security [ethernet interface | port-channel port-channel-number]
Parameters
•
interface — A valid Ethernet port.
• port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
In this example, all classes of entries in the port-lock status are displayed:
Console#
show ports security
Port Action Trap Frequency
1 Disabled - -
2 Disabled Discard Disabled -
3 Disabled - - -
4 Disabled - - -
5 Disqbled - - -
6 Disabled - - -
7 Disabled - - -
8 Disabled - - -
9 Disabled - - -
10 Disabled - - -
ch1 Disabled
ch2 Disabled
ch3 Disabled
ch4 Disabled
ch5 Disabled
ch6 Disabled
TL-SG3109/TL-SL3428/TL-SL3452 Gigabit Managed Switch Family CLI Reference Guide
To Next Page
Loading...
