TP-Link TL-SG3109 - Copy System Files; View EAP Statistics

88
89
Figure 126: Copy Files Page
The Copy Files Page contains the following elds:
Copy Configuration — Copies the Running
Conguration le to the Startup Conguration le.
Source — Indicates the Running Conguration le is
selected.
Destination — Indicates the Startup Conguration le is selected.
Restore Conguration Factory Defaults — Resets the Conguration le to the factory defaults. The factory defaults are
reset after the device is reset. When unselected, the device maintains the current Conguration le.
2. Select Copy Conguration.
3. Click . The le is copied.
To restore the default conguration:
1. Click System > File Management > Copy Files. The Copy Files Page opens.
2. Select Restore Conguration Factory Defaults.
3. Click
. The factory defaults are restored, and the device is updated.



