TP-Link TL-SG3210 - Show Dot1 X Global; Show Dot1 X Interface

show dot1x global
Description
The show dot1x global command is used to display the global configuration of
801.X.
Syntax
show dot1x global
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the configuration of 801.X globally:
TL-SG3424(config)# show dot1x global
show dot1x interface
Description
The show dot1x interface command is used to display all ports’ or the specified
port’s configuration information of 801.X.
Syntax
show dot1x interface [ gigabitEthernet port ]
Parameter
port ——The number of the Ethernet port. Display the configuration of all the
ports by default.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the configuration information of 801.X for all ports:
TL-SG3424(config)# show dot1x interface
Display the configuration information of 801.X for port 1:
TL-SG3424(config)# show dot1x interface gigabitEthernet 1/0/1
94