key-file —— The name of the key-file which is selected to download. The length
of the name ranges from 1 to 25 characters. The key length of the downloaded
file must be in the range of 512 to 3072 bits.
ip-addr —— The IP address of the TFTP server. Both IPv4 and IPv6 addresses
are supported, for example 192.168.0.1 or fe80::1234.
Command Mode
Global Configuration Mode
Example
Download an SSH-1 type key file named ssh.key from TFTP server with the IP
address 192.168.0.148:
TL-SG3424(config)# ip ssh download v1 ssh.key ip-address 192.168.0.148
Download an SSH-1 type key file named ssh.key from TFTP server with the IP
address fe80::1234:
TL-SG3424(config)# ip ssh download v1 ssh.key ip-address fe80::1234
show ip ssh
Description
The show ip ssh command is used to display the global configuration of SSH.
Syntax
show ip ssh
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the global configuration of SSH:
TL-SG3424(config)# show ip ssh
106
To Next Page
Loading...
