TP-Link TL-SG3210 - Show Mac Address-Table Vlan

Example
Display the information of the MAC address 00:00:00:00:23:00:
TL-SG3424(config)#show mac address-table address 00:00:00:00:23:00
show mac address-table vlan
Description
The show mac address-table vlan command is used to display the MAC
address configuration of the specified vlan.
Syntax
show mac address-table vlan vid
Parameter
vid ——The specified VLAN id.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the MAC address configuration of vlan 1:
TL-SG3424(config)# show mac address-table vlan 1
clear mac address-table
Description
The clear mac address-table command is used to clear all address entries for
the specified type.
Syntax
clear mac address-table { dynamic | filtering | static }
Parameter
dynamic | filtering | static —— The type of your desired entry.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Clear the information of dynamic Address entries:
TL-SG3424(config)# clear mac address-table dynamic
113