TP-Link TL-SG3210 - Show Ipv6 Interface Vlan

Configuration Mode
Interface Configuration Mode (interface vlan)
Example
Configure the global address 3001::1/64 on the interface:
TL-SG3424(config)# interface vlan 1
TL-SG3424(config-if)# ipv6 address 3001::1/64
show ipv6 interface vlan
Description
This command is used to display the configured ipv6 information of the
management vlan,interface, including ipv6 function status, link-local address and
global address, ipv6 multicast groups etc.
Syntax
show ipv6 interface vlan vlan-id
Parameter
vlan-id—— The VLAN ID of the management VLAN.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the ipv6 information of the management vlan interface:
TL-SG3424(config)# show ipv6 interface vlan 1
135