Command Mode
Global Configuration Mode
Example
Create a PoE profile named “IP Camera” whose PoE status is “enable”, PoE
priority is “low” and the power limit is “5w”:
TL-SG3424P(config)# power profile “IP Camera” supply enable priority low
consumption 50
power time-range
Description
The power time-range command is used to create PoE time-range for the
switch and enter Power Time-range Create Configuration Mode. After a PoE
time-range is created, you need to specify the date and time which has three
mode options available: absolute, periodic and holiday. A PoE time-range can
implement multiple time-ranges simultaneously as long as they do not conflict
with each other. To delete the corresponding PoE time-range configuration,
please use no power time-range command. The PoE time-range determines
the power supply time of the switch. You can specify a PoE time-range for each
PoE port individually.
Syntax
power time-range name
no power time-range name
Parameter
name —— The PoE time-range name, ranging from 1 to 16 characters.
Command Mode
Global Configuration Mode
Example
Create a PoE time-range named “tRange1” for the switch:
TL-SG3424P(config)# power time-range tRange1
167
To Next Page
Loading...
