Parameter
start-date —— The start date in Absoluteness Mode, in the format of
MM/DD/YYYY.
end-date —— The end date in Absoluteness Mode, in the format of
MM/DD/YYYY.
Command Mode
Power Time-range Create Configuration Mode
Example
Create an absolute mode time-range for the PoE of the switch and specify the
date extending from May 5, 2012 through Oct. 5, 2012:
TL-SG3424P(config)# power time-range tRange1
TL-SG3424P(config-pwr-time-range)# absolute start 05/05/2012 end
10/05/2012
periodic
Description
The periodic command is used to create a periodic mode time-range for the
PoE time-range of the switch. The switch will supply power when the specified
periodic time occurs. To delete the corresponding periodic mode time-range
configuration, please use no periodic command.
Syntax
periodic { [ week-date week-day ] [ time-slice1 time-slice ] [ time-slice2 time-slice ]
[ time-slice3 time-slice ] [ time-slice4 time-slice ] }
no periodic [ week-date | time-slice ]
Parameter
week-day —— Periodic Mode, with “1-7”, “daily”, “off-day” and “working-day”
options. “1-7” should be entered in the format of 1-3, 7 which represent Monday,
Tuesday, Wednesday and Sunday. “Daily” represents every day. “Off-day”
represents weekend. “Working-day” represents working day.
time-slice —— Create time-slice, in the format of HH:MM-HH:MM.
Command Mode
Power Time-range Create Configuration Mode
Example
Configure the PoE time-range named “tRange2” as a periodic time-range and
169
To Next Page
Loading...
