TP-Link TL-SG3210 - Power Inline Time-Range; Show Power Inline

TL-SG3424P(config)# interface gigabitEthernet 1/0/2
TL-SG3424P(config-if)# power inline profile “IP Camera”
power inline time-range
Description
The power inline time-range command is used to bind a PoE time-range to the
corresponding port. To cancel the bind relation, please use no power inline
time-range command.
Syntax
power inline time-range name
no power inline time-range
Parameter
name —— The name of the PoE time-range to be bound to the port.
Command Mode
Interface Configuration Mode
Example
Bind the PoE time-range named “tRange2" to port 2:
TL-SG3424P(config)# interface gigabitEthernet 1/0/2
TL-SG3424P(config-if)# power inline time-range tRange2
show power inline
Description
The show power inline command is used to display the global PoE information
of the system.
Syntax
show power inline
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the PoE information of the system:
TL-SG3424P# show power inline
173