TP-Link TL-SG3210 - Show Ip Igmp Snooping Interface; Show Ip Igmp Snooping Vlan

Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the global configuration of IGMP:
TL-SG3424# show ip igmp snooping
show ip igmp snooping interface
Description
The show ip igmp snooping interface command is used to display the port
configuration of IGMP snooping.
Syntax
show ip igmp snooping interface gigabitEthernet [ port | port-list ]
{ basic-config | filter | packet-stat }
Parameter
port —— The Ethernet port number.
port-list —— The list of Ethernet ports.
basic-config | filter | packet-stat —— The related configuration information
selected to display.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the IGMP filter configuration of all ports:
TL-SG3424# show ip igmp snooping interface gigabitEthernet filter
Display the IGMP basic configuration of port 2:
TL-SG3424# show ip igmp snooping interface gigabitEthernet 1/0/2
basic-config
Display the IGMP packet statistics of ports 1-4:
TL-SG3424# show ip igmp snooping interface gigabitEthernet 1/0/1-4
packet-stat
show ip igmp snooping vlan
Description
215