TP-Link TL-SG3210 - Show Lldp; Show Lldp Interface

show lldp
Description
The show lldp command is used to display the global configuration of LLDP and
LLDP-MED fast start repeat count number.
Syntax
show lldp
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the global configuration of LLDP and LLDP-MED fast start repeat count
number:
TL-SG3424P# show lldp
show lldp interface
Description
The show lldp interface command is used to display LLDP and LLDP-MED
configuration of the corresponding port. By default, the configuration of all the
ports will be displayed.
Syntax
show lldp interface [ gigabitEthernet port ]
Parameter
port —— The Ethernet port number.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the LLDP and LLDP-MED configuration of port 1:
TL-SG3424P# show lldp interface gigabitEthernet 1/0/1
262