TP-Link TL-SG3210 - 1.2 CLI Command Modes

Figure 1-23 Load the Private Key
After successful authentication, please enter the login user name. If you log on to the switch
without entering password, it indicates that the key has been successfully loaded.
Figure 1-24 Log on the Switch
1.2 CLI Command Modes
The CLI is divided into different command modes: User EXEC Mode, Privileged EXEC Mode,
Global Configuration Mode, Interface Configuration Mode and VLAN Configuration Mode. Interface
Configuration Mode can also be divided into Interface gigabitEthernet, Interface link-aggregation
and some other modes, which is shown as the following diagram.
14