Command Mode
Any Configuration Mode
Example
Return to Global Configuration Mode from Interface Configuration Mode, and
then return to Privileged EXEC Mode:
TL-SG3424(config-if)# exit
TL-SG3424(config)# exit
TL-SG3424#
end
Description
The end command is used to return to Privileged EXEC Mode.
Syntax
end
Command Mode
Any Configuration Mode
Example
Return to Privileged EXEC Mode from Interface Configuration Mode:
TL-SG3424(config-if)# end
TL-SG3424#
show history
Description
The show history command is used to show the latest 20 commands you
entered in the current mode since the switch is powered.
Syntax
show history
Command Mode
Privileged EXEC Mode and any Configuration Mode
Example
Show the commands you have entered in the current mode:
23
To Next Page
Loading...
