EasyManua.ls Logo

TP-Link TL-SG3210 - Ip Http Secure-Server Download Certificate

TP-Link TL-SG3210
285 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Example
Configure the timeout time of the HTTP server connection as 15 minutes:
TL-SG3424(config)# ip http secure-session 15
ip http secure-server download certificate
Description
The ip http secure-server download certificate command is used to download
a certificate to the switch from TFTP server.
Syntax
ip http secure-server download certificate ssl-cert ip-address ip-addr
Parameter
ssl-cert —— The name of the SSL certificate which is selected to download to
the switch. The length of the name ranges from 1 to 25 characters. The
Certificate must be BASE64 encoded.
ip-addr —— The IP address of the TFTP server. Both IPv4 and IPv6 addresses
are supported, for example 192.168.0.1 or fe80::1234.
Command Mode
Global Configuration Mode
Example
Download an SSL Certificate named ssl.cert from TFTP server with the IP
address of 192.168.0.146:
TL-SG3424(config)# ip http secure-server download certificate ssl.cert
ip-address 192.168.0.146
Download an SSL Certificate named ssl.cert from TFTP server with the IP
address of fe80::1234
TL-SG3424(config)# ip http secure-server download certificate ssl.cert
ip-address fe80::1234
66

Table of Contents

Other manuals for TP-Link TL-SG3210

Related product manuals