TP-Link TL-SG3210 - 7.1 STP Config

Display the running status of DHCP-Snooping:
TL-SG3424# show ip dhcp snooping
show ip dhcp snooping information
Description
The show ip dhcp snooping information command is used to display the
Option 82 configuration status of DHCP-Snooping.
Syntax
show ip dhcp snooping information
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the Option 82 configuration status of DHCP-Snooping:
TL-SG3424# show ip dhcp snooping information
show ip dhcp snooping interface gigabitEthernet
Description
The show ip dhcp snooping interface gigabitEthernet command is used to
display the DHCP-Snooping configuration of desired Gigabit Ethernet ports.
Syntax
show ip dhcp snooping interface gigabitEthernet [ port ]
Parameters
port ——The Ethernet port number.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the DHCP-Snooping configuration of port 2:
TL-SG3424# show ip dhcp snooping interface gigabitEthernet 1/0/2
78