TP-Link TL-SG3210 - Show Ip Arp Inspection; Show Ip Arp Inspection Interface

Example
Restore port 5 to the ARP transmit status:
TL-SG3424(config)# interface gigabitEthernet 1/0/5
TL-SG3424(config-if)# ip arp inspection recover
show ip arp inspection
Description
The show ip arp inspection command is used to display the ARP detection
global configuration including the enable/disable status and the Trusted Port list.
Syntax
show ip arp inspection
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the ARP detection configuration globally:
TL-SG3424(config)# show ip arp inspection
show ip arp inspection interface
Description
The show ip arp inspection interface command is used to display the interface
configuration of ARP detection.
Syntax
show ip arp inspection interface [ gigabitEthernet port ]
Parameter
port ——The Ethernet port number.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the configuration of all the ports:
82