TP-Link TL-SL2210 - Chapter 12 Maintenance; System Monitor

129
TL-SL2428(config)# interface fastEthernet 1/0/3
TL-SL2428(config-if)# ip igmp snooping
ip igmp snooping immediate-leave
Description
The ip igmp snooping immediate-leave command is used to configure the
Fast Leave function for port. To disable the Fast Leave function, please use no
ip igmp snooping immediate-leave command.
Syntax
ip igmp snooping immediate-leave
no ip igmp snooping immediate-leave
Command Mode
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
Example
Enable the Fast Leave function for port 3:
TL-SL2428(config)# interface fastEthernet 1/0/3
TL-SL2428(config-if)# ip igmp snooping immediate-leave
ip igmp snooping drop-unknown
Description
The ip igmp snooping drop-unknown command is used to process the
unknown multicast as discard. To disable the operation of processing the
unknown multicast as discard, please use no ip igmp snooping
drop-unknown command.
Syntax
ip igmp snooping drop-unknown
no ip igmp snooping drop-unknown
Command Mode
Global Configuration Mode
Example
Specify the operation to process unknown multicast as discard:
TL-SL2428(config)# ip igmp snooping drop-unknown