TP-Link TL-SL2210 - Chapter 12 Ethernet Configuration Commands; Interface Fastethernet; Interface Range Fastethernet

72
Chapter 12 Ethernet Configuration Commands
Ethernet Configuration Commands can be used to configure the Bandwidth Control, Negotiation
Mode and Storm Control for Ethernet ports.
interface fastEthernet
Description
The interface fastEthernet command is used to enter the interface
fastEthernet Configuration Mode and configure the corresponding Fast Ethernet
port.
Syntax
interface fastEthernet port
Parameter
port —— The Fast/Gigabit Ethernet port number.
Command Mode
Global Configuration Mode
Example
To enter the Interface fastEthernet Configuration Mode and configure Fast
Ethernet port 2:
TL-SL2428(config)#interface fastEthernet 1/0/2
interface range fastEthernet
Description
The interface range fastEthernet command is used to enter the interface
range fastEthernet Configuration Mode and configure multiple Fast Ethernet
ports at the same time.
Syntax
interface range fastEthernet port-list
Parameter
port-list —— The list of Fast Ethernet ports.
Command Mode
Global Configuration Mode