TP-Link TL-SL5428E - show ip arp inspection; show ip arp inspection interface

VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
85
Gzcorng"
Restore Fast Ethernet port 5 to the ARP transmit status:
VN/UN764:G*eqphki+%kpvgthceg"hcuvGvjgtpgv 1/0/5
VN/UN764:G*eqphki/kh+%kr"ctr"kpurgevkqp"tgeqxgt"
ujqy"kr"ctr"kpurgevkqp"
Fguetkrvkqp"
The ujqy" kr" ctr" kpurgevkqp command is used to display the ARP detection
global configuration including the enable/disable status and the Trusted Port list.
U{pvcz"
ujqy"kr"ctr"kpurgevkqp
Eqoocpf"Oqfg"
Privileged EXEC Mode and Any Configuration Mode
Gzcorng"
Display the ARP detection configuration globally:
VN/UN764:G*eqphki+%ujqy"kr"ctr"kpurgevkqp"
ujqy"kr"ctr"kpurgevkqp"kpvgthceg"
Fguetkrvkqp"
The ujqy" kr" ctr" kpurgevkqp" kpvgthceg command is used to display the
interface configuration of ARP detection.
U{pvcz"
ujqy"kr"ctr"kpurgevkqp"kpvgthceg"[ hcuvGvjgtpgv port | ikicdkvGvjgtpgv"port]
Rctcogvgt"
port ——The Fast/Gigabit Ethernet port number.
Eqoocpf"Oqfg"
Privileged EXEC Mode and Any Configuration Mode
Gzcorng"
Display the configuration of Fast Ethernet port 1: