TP-Link TL-SL5428E - Chapter 17 PPPoE Circuit-ID Insertion Commands; pppoe circuit-id(global); pppoe circuit-id(interface)

VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
103
Ejcrvgt"39" RRRqG"Ektewkv/KF"Kpugtvkqp"Eqoocpfu"
The PPPoE Circuit-ID Insertion feature provides a way to extract a Circuit-ID as an identifier for
the authentication, authorization, and accounting (AAA) access requests on an Ethernet interface.
When enabled, the switch attaches a tag to the PPPoE discovery packets, which is called the
PPPoE Vendor-Specific tag and it contains a unique line identifier. The BRAS receives the tagged
packet, decodes the tag, and uses the Circuit-ID field of that tag as a NAS-Port-ID attribute in the
RADIUS server for PPP authentication and AAA (authentication, authorization, and accounting)
access requests. The switch will remove the Circuit-ID tag from the received PPPoE Active
Discovery Offer and Session-confirmation packets from the BRAS.
rrrqg"ektewkv/kf*inqdcn+"
Fguetkrvkqp"
The rrrqg" ektewkv/kf command is used to enable the PPPoE Circuit-ID
Insertion function globally. To disable the PPPoE Circuit-ID Insertion function,
please use"pq"rrrqg"ektewkv/kf"command.
U{pvcz"
rrrqg"ektewkv/kf"
pq"rrrqg"ektewkv/kf"
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Enable the PPPoE Circuit-ID Insertion function:
VN/UN764:G*eqphki+%"rrrqg"ektewkv/kf"
rrrqg"ektewkv/kf*kpvgthceg+"
Fguetkrvkqp"
The" rrrqg" ektewkv/kf command is used to enable the PPPoE Circuit-ID
Insertion function for a specified port. To disable the PPPoE Circuit-ID Insertion
function on a specified port, please use"pq"rrrqg"ektewkv/kf"command.