VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
111
priority. Only the log with the same or smaller severity level value will be sent to
the corresponding log host. By default, it is 6 indicating that the log information
marked with 0–6 will be sent to the log host.
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Set the IP address as 192.168.0.148, the level 5:
VN/UN764:G*eqphki+%nqiikpi"jquv"kpfgz 2 192.168.0.148 5 "
ujqy"nqiikpi"nqecn/eqphki"
Fguetkrvkqp"
The ujqy"nqiikpi"nqecn/eqphki command is used to display the configuration
of the Local Log including the log buffer and the log file.
U{pvcz"
ujqy"nqiikpi"nqecn/eqphki"
Eqoocpf"Oqfg"
Privileged EXEC Mode and Any Configuration Mode
Gzcorng"
Display the configuration of the Local Log:
VN/UN764:G*eqphki+%ujqy"nqiikpi"nqecn/eqphki"
ujqy"nqiikpi"nqijquv"
Fguetkrvkqp"
The"ujqy"nqiikpi"nqijquv command is used to display the configuration of the
log host.
U{pvcz"
ujqy"nqiikpi"nqijquv"[index]"
Rctcogvgt"
index ——The index of the log host whose configuration will be displayed.
Display the configuration of all the log hosts by default.
To Next Page
Loading...
