VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
171
Ejcrvgt"48" Rqtv"Okttqt"Eqoocpfu"
Port Mirror refers to the process of forwarding copies of packets from one port to a monitoring port.
Usually, the monitoring port is connected to data diagnose device, which is used to analyze the
monitored packets for monitoring and troubleshooting the network.
oqpkvqt"uguukqp"fguvkpcvkqp"kpvgthceg"
Fguetkrvkqp"
The oqpkvqt"uguukqp fguvkpcvkqp kpvgthceg"command is used to configure the
monitoring port. Each monitor session has only one monitoring port. To change
the monitoring port, please use the oqpkvqt" uguukqp fguvkpcvkqp
kpvgthceg
command by changing the port value. To delete the corresponding monitor
session configuration, please use"pq"oqpkvqt"uguukqp command.
U{pvcz"
oqpkvqt" uguukqp" session_num fguvkpcvkqp kpvgthceg" { h cuv Gvjg tpg v port |
ikicdkvGvjgtpgv port }
pq"oqpkvqt"uguukqp"session_num
Rctcogvgt"
session_num —— The monitor session number, the value of which is 1.
port —— The Fast/Gigabit Ethernet port number.
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Create monitor session 1 and configure Fast Ethernet port 1 as the monitoring
port:
VN/UN764:G*eqphki+%oqpkvqt" uguukqp"1"fguvkpcvkqp"kpvgthceg"hcuvGvjgtpgv
1/0/1
Delete the monitor session 1:
VN/UN764:G*eqphki+%pq"oqpkvqt"uguukqp"1"
To Next Page
Loading...
