VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
173
VN/UN764:G*eqphki+%oqpkvqt" uguukqp 1" uqwteg" kpvgthceg" hcuvGvjgtpgv
1/0/4-5,1/0/7 rx
Delete the Fast Ethernet port 4 in monitor session 1 and its configuration:
VN/UN764:G*eqphki+%pq" oqpkvqt" uguukqp" 1" uqwteg" kpvgthceg" hcuvGvjgtpgv
1/0/4 rx
ujqy"oqpkvqt"uguukqp" "
Fguetkrvkqp"
The ujqy" oqpkvqt" uguukqp command is used to display the configuration of
port monitoring.
U{pvcz"
ujqy"oqpkvqt"uguukqp"[session_num]"
Rctcogvgt"
session_num —— The monitor session number, the value of which is 1.
Eqoocpf"Oqfg"
Privileged EXEC Mode and Any Configuration Mode
Gzcorng"
Display the monitoring configuration of monitor session 1:
VN/UN764:G*eqphki+%ujqy"oqpkvqt"uguukqp"1
To Next Page
Loading...
