VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
203
Rctcogvgtu"
revision —— The revision level for MST region identification, ranging from 0 to
65535.
Eqoocpf"Oqfg"
MST Configuration Mode"
Gzcorng"
Configure the revision level of MST as 100:"
VN/UN764:G*eqphki+%urcppkpi/vtgg"ouv"eqphkiwtcvkqp"
VN/UN764:G*eqphki/ouv+%tgxkukqp 100
urcppkpi/vtgg"ouv"kpuvcpeg"
Fguetkrvkqp"
The urcppkpi/vtgg"ouv"kpuvcpeg"command is used to configure the priority of
MST instance. To return to the default value of MST instance priority, please use
pq"urcppkpi/vtgg"ouv"kpuvcpeg command.
U{pvcz"
urcppkpi/vtgg"ouv"kpuvcpeg"instance-id"rtkqtkv{"pri
pq"urcppkpi/vtgg"ouv"kpuvcpeg"instance-id rtkqtkv{
Rctcogvgt"
instance-id —— Instance ID, ranging from 1 to 8.
pri —— MSTI Priority, which must be multiple of 4096 ranging from 0 to 61440.
By default, it is 32768. MSTI priority is an important criterion on determining if
the switch will be chosen as the root bridge in the specific instance.
Eqoocpf"Oqfg"
Global Configuration Mode"
Gzcorng"
Enable the MST Instance 1 and configure its priority as 4096:"
VN/UN764:G*eqphki+%urcppkpi/vtgg"ouv"kpuvcpeg"1"rtkqtkv{"4096
To Next Page
Loading...
