VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
227
Ejcrvgt"54" FNFR"Eqoocpfu"
DLDP (Device Link Detection Protocol) is used to monitor the link state of fiber-optic or twisted-pair
Ethernet cables. When a unidirectional link is detected, the corresponding port will be shut down
automatically or manually (depending on the shut mode configured).
fnfr*inqdcn+"
Fguetkrvkqp"
The fnfr command is used to enable the DLDP function globally. To disable it,
please use pq"fnfr command.
U{pvcz"
fnfr"
pq"fnfr"
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Enable the DLDP function globally:
VN/UN764:G*eqphki+%"fnfr"
fnfr"kpvgtxcn"
Fguetkrvkqp"
The fnfr" kpvgtxcn command is used to define the interval of sending
advertisement packets on ports that are in the advertisement state.
U{pvcz"
fnfr"kpvgtxcn"interval-time"
Rctcogvgt"
interval-time —— The interval of sending advertisement packets. It ranges from
1 to 30 seconds. By default, it is 5 seconds.
Eqoocpf"Oqfg"
Global Configuration Mode
To Next Page
Loading...
