TP-Link TL-SL5428E - dldp(interface); dldp reset(interface)

VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
229
Gzcorng"
Reset the DLDP function globally:
VN/UN764:G*eqphki+%"fnfr"tgugv"
fnfr*kpvgthceg+" "
Fguetkrvkqp"
The fnfr command is used to enable the DLDP function of the specified port.
To disable it, please use pq"fnfr command.
U{pvcz"
fnfr"
pq"fnfr"
Eqoocpf"Oqfg"
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
Gzcorng"
Enable the DLDP function of ports 2-4:
VN/UN764:G"*eqphki+%"kpvgthceg"tcpig"hcuvGvjgtpgv"1/0/2-4"
VN/UN764:G"*eqphki/kh/tcpig+%"fnfr"
fnfr"tgugv*kpvgthceg+"
Fguetkrvkqp"
The fnfr"tgugv command is used to reset the specified port and restart the link
detect process.
U{pvcz"
fnfr"tgugv"
Eqoocpf"Oqfg"
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)