VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
301
Gzcorng"
Specify the current switch as individual switch:
VN/UN764:G*eqphki+%enwuvgt"kpfkxkfwcn"
ujqy"enwuvgt"pfr"
Fguetkrvkqp"
The ujqy"enwuvgt"pfr command is used to display the NDP information.
U{pvcz"
ujqy" enwuvgt" pfr ["kpvgthceg"[" hcuvGvjgtpgv port" |" ikicdkvGvjgtpgv" port" |
vgp/ikicdkvGvjgtpgv port"] ]
Rctcogvgt"
port" —— Specify the Ethernet port number. The NDP information of all ports
will be displayed if the port number is not specified here."
Eqoocpf"Oqfg"
Privileged EXEC Mode and Any Configuration Mode
Gzcorng"
Display the global NDP information of the switch:
VN/UN764:G*eqphki+%ujqy"enwuvgt"pfr"
Display the NDP information of all the ports of the switch:
VN/UN764:G*eqphki+%ujqy"enwuvgt"pfr"kpvgthceg"
ujqy"enwuvgt"pvfr"
Fguetkrvkqp"
The ujqy" enwuvgt" pvfr command is used to display NTDP configuration
information.
U{pvcz"
ujqy" enwuvgt" pvfr" [" kpvgthceg" [hcuvGvjgtpgv" port | ikicdkvGvjgtpgv port ] |
device-list"]
Rctcogvgt"
port —— The Fast/Gigabit Ethernet port number. By default, the configuration
of all Fast / Gigabit Ethernet ports is displayed.
device-list" —— To display the device table of NTDP.
To Next Page
Loading...
