VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
306
Gzcorng"
Configure a TACACS+ server with the IP address as 1.1.1.1, TCP port as 1500,
timeout as 6 seconds, and the unencrypted key string as 12345.
VN/UN764:G*eqphki+% vceceu/ugtxgt" jquv 1.1.1.1 rqtv 1500 vkogqwv 6 mg{
12345
ujqy"vceceu/ugtxgt"
Fguetkrvkqp"
This ujqy"vceceu/ugtxgt"command is used to display the summary information
of the TACACS+ servers.
U{pvcz"
ujqy"vceceu/ugtxgt"
Eqoocpf"Oqfg"
Privileged EXEC Mode and Any Configuration Mode
Gzcorng"
Display the information of all the TACACS+ servers:
VN/UN764:G*eqphki+%"ujqy"vceceu/ugtxgt
tcfkwu/ugtxgt"jquv"
Fguetkrvkqp"
The tcfkwu/ugtxgt"jquv"command is used to configure a new RADIUS server.
To delete the specified RADIUS server, please use pq" tcfkwu/ugtxgt" jquv
command.
U{pvcz"
tcfkwu/ugtxgt" jquv ip-address [" cwvj/rqtv port-id ] [" ceev/rqtv port-id ]
[ vkogqwv time ] [ tgvtcpuokv"number ] [ mg{ { [ 0 ] string | 7 encrypted-string } ]
pq"tcfkwu/ugtxgt"jquv"ip-address
Rctcogvgt"
ip-address —— Specify the IP address of the RADIUS server.
cwvj/rqtv port-id —— Specify the UDP destination port for authentication
requests. By default it is 1812."
To Next Page
Loading...
