TP-Link TL-SL5428E - line console; login authentication(console)

VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
314
Gzcorng"
Display the information of the default 802.1X accounting method list:
VN/UN764:G*eqphki+%"ujqy"ccc"ceeqwpvkpi
nkpg"eqpuqng"
Fguetkrvkqp"
The" nkpg eqpuqng command is used to enter the Line Configuration Mode
configure the console port to which you want to apply the authentication list.
U{pvcz"
nkpg"eqpuqng"{ linenum }
Rctcogvgt"
linenum —— The number of users allowed to login through console port. Its
value is 0 in general, for the reason that console input is only active on one
console port at a time.
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Enter the Console port configuration mode and configure the console port 0:
VN/UN764:G*eqphki+%nkpg"eqpuqng 0
nqikp"cwvjgpvkecvkqp*eqpuqng+"
Fguetkrvkqp"
The" nqikp" cwvjgpvkecvkqp command is used to apply the login authentication
method list to the console port. To restore to the default authentication method
list, please use the pq"nqikp"cwvjgpvkecvkqp"command.
U{pvcz"
nqikp"cwvjgpvkecvkqp"{ method-list }
pq"nqikp"cwvjgpvkecvkqp