TP-Link TL-SL5428E - line telnet; login authentication(telnet)

VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
316
nkpg"vgnpgv"
Fguetkrvkqp"
The" nkpg vgnpgv command is used to enter the Line Configuration Mode
configure the telnet terminal line to which you want to apply the authentication
list.
U{pvcz"
nkpg"vgnpgv
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Enter the telnet terminal line configuration mode:
VN/UN764:G*eqphki+%nkpg"vgnpgv
nqikp"cwvjgpvkecvkqp*vgnpgv+"
Fguetkrvkqp"
The" nqikp" cwvjgpvkecvkqp command is used to apply the login authentication
method list to the telnet terminal line. To restore to the default authentication
method list, please use the pq"nqikp"cwvjgpvkecvkqp"command.
U{pvcz"
nqikp"cwvjgpvkecvkqp"{ method-list }
pq"nqikp"cwvjgpvkecvkqp
Rctcogvgt"
method-list —— Specify the login method list on the telnet terminal line. It is
“default” by default, which contains the method “local”.
Eqoocpf"Oqfg"
Line Configuration Mode
Gzcorng"
Configure the login authentication method list on the telnet terminal line as
“list1”:
VN/UN764:G*eqphki+%nkpg"vgnpgv