VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
319
Rctcogvgt"
method-list —— Specify the enable method list on the ssh terminal line. It is
“default” by default, which contains the method “none”.
Eqoocpf"Oqfg"
Line Configuration Mode
Gzcorng"
Configure the enable authentication method list on the ssh terminal line as
“list2”:
VN/UN764:G*eqphki+%"nkpg"uuj
VN/UN764:G*eqphki/nkpg+%"gpcdng"cwvjgpvkecvkqp"list2
kr"jvvr"nqikp"cwvjgpvkecvkqp"
Fguetkrvkqp"
The" kr" jvvr" nqikp" cwvjgpvkecvkqp command is used to apply the login
authentication method list to users accessing through HTTP. To restore to the
default authentication method list, please use the pq"kr"jvvr"nqikp"
cwvjgpvkecvkqp"command.
U{pvcz"
kr"jvvr"nqikp"cwvjgpvkecvkqp"{ method-list }
pq"kr"jvvr"nqikp"cwvjgpvkecvkqp
Rctcogvgt"
method-list —— Specify the login method list on the HTTP access. It is “default”
by default, which contains the method “local”.
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Configure the login authentication method list on the HTTP access as “list1”:
VN/UN764:G*eqphki+%"kr"jvvr"nqikp"cwvjgpvkecvkqp"list1
To Next Page
Loading...
