TP-Link TL-SL5428E - private-vlan association; switchport private-vlan

VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
50
Eqoocpf"Oqfg"
VLAN Configuration Mode (VLAN)
Gzcorng"
Configure the VLAN 4 as the community VLAN of the private VLAN:
VN/UN764:G*eqphki+%xncp"4
VN/UN764:G*eqphki/xncp+%rtkxcvg/xncp"eqoowpkv{"
rtkxcvg/xncp"cuuqekcvkqp"
Fguetkrvkqp"
The rtkxcvg/xncp" cuuqekcvkqp" command is used to associate primary VLAN
with secondary VLAN. To exterminate the currently association, please use pq"
rtkxcvg/xncp cuuqekcvkqp"command.
U{pvcz"
rtkxcvg/xncp"cuuqekcvkqp"vlan_list"
pq"rtkxcvg/xncp"cuuqekcvkqp"vlan_list
Rctcogvgt"
vlan_list —— Secondary VLAN ID, ranging from 2 to 4049.
Eqoocpf"Oqfg"
VLAN Configuration Mode (VLAN)
Gzcorng"
Associate primary VLAN 3 with community VLAN 4 as a private VLAN:
VN/UN764:G*eqphki+%xncp"3
VN/UN764:G*eqphki/xncp+%rtkxcvg/xncp"cuuqekcvkqp"4"
uykvejrqtv"rtkxcvg/xncp"
Fguetkrvkqp"
The uykvejrqtv"rtkxcvg/xncp"command is used to configure the private VLAN
mode for the switchport. To invalid the configuration, please use pq"uykvejrqtv"
rtkxcvg/xncp command.