VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
67
Rctcogvgt"
minutes ——The timeout time, ranging from 5 to 30 in minutes. The value is 10
by default.
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Configure the timeout time of the switch as 15 minutes:
VN/UN764:G*eqphki+%wugt"kfng/vkogqwv"15
nkpg"
Fguetkrvkqp"
The" nkpg command is used to enter the Line Configuration Mode and make
related configurations for the desired user(s), including the login mode and
password configurations.
U{pvcz"
nkpg"[eqpuqng linenum |"xv{"startlinenum endlinenum ]
Rctcogvgt"
linenum —— The number of users allowed to login through console port. Its
value is 0 in general as there is only one console port on a switch.
startlinenum ——The start serial number of the login user selected to configure
the login mode and password, ranging from 0 to 15. 0 means the first login user
number, 1 means the second, and the rest can be done on the same manner.
endlinenum —— The end serial number of the login user selected to configure
the login mode and password, ranging from 0 to 15. 0 means the first login user
number, 1 means the second, and the rest can be done on the same manner.
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Enter the Console port configuration mode and configure the console port 0:
VN/UN764:G*eqphki+%nkpg"eqpuqng 0
To Next Page
Loading...
