13
Chapter 2
Set Up Internet Connection
Note:
If the login window does not appear, please refer to the FAQ section.
5. Click Change Mode and switch to the Multi-SSID mode.
6. Wait until the access point reboots, then reconnect to the access point and log in
again.
7. Follow the step-by-step instructions to complete the configuration.
8. Now, connect your wireless devices to the Wi-Fi networks and enjoy the internet!
Tip:
If you want to isolate different networks, go to Wireless > Wireless Settings, click the edit icon of each SSID entry and
set different VLAN IDs.
To Next Page
Loading...
