36
Chapter 6
Access Control
Access Control is used to block or allow specific client devices to access your network
(via wired or wireless) based on a list of blocked devices (Blacklist) or allowed devices
(Whitelist).
1. Visit
http://tplinkap.net, and log in with the password you set for the access point.
2. Go to
Internet > Access Control.
Note: Access Control is not available in Client mode.
3. Turn on Access Control.
4. Select the access mode to either block (recommended) or allow specific device(s).
To block specific devices:
1 ) Click
Blacklist.
2 ) Click Add.
3 ) Select the devices you want to block and click ADD.
To allow specific devices:
1 ) Click
Whitelist and click SAVE. Your current device will be automatically added to
the whitelist.
To Next Page
Loading...
