26
Chapter 4
Wireless Settings
TWT (Target Wake Time) allows 802.11ax access points and clients to negotiate their
periods to transmit and receive data packets. Clients only wake up at TWT sessions and
remain in sleep mode for the rest of the time, which significantly extend their battery
life. It is disabled by default.
1. Go to Wireless > Wireless Settings.
2. Enable TWT.
• To customize a wireless network:
1. Go to Wireless > Wireless Settings.
2. Click 2.4GHz or 5 GHz, select a network and click
.
3. Customize the network according to your needs. You can:
• Enable or disable the network.
• Change the extended SSID, password, and security option.
• Select Hide SSID for the network, then your SSID won’t display when wireless
devices scan for wireless networks and you will need to manually enter the SSID to
join the network.
4. Click SAVE .
• To isolate wireless networks:
1. Go to Wireless > Wireless Settings.
2. Click
of each SSID entry and set different VLAN IDs. Only the networks with the
same VLAN ID can access each other. Wireless networks will be isolated by VLANs.
To Next Page
Loading...
