27
Chapter 4
Wireless Settings
3. Click SAVE .
• To change the transmit power:
1. Go to Wireless > Wireless Settings.
2. Click 2.4GHz or 5 GHz.
3. Select an option from the Transmit Power drop-down list.
• To change channel settings:
1. Go to Wireless > Wireless Settings.
2. Click 2.4GHz or 5 GHz.
3. Select a Channel Width (bandwidth) for the wireless network. It is recommended to
just leave it as default.
4. Select an operating Channel for the wireless network. It is recommended to leave
the channel to Auto if you are not experiencing the intermittent wireless connection
issue.
5. Click SAVE .
• To change the transmission mode:
1. Go to Wireless > Wireless Settings.
2. Click 2.4GHz or 5 GHz.
3. Select a transmission Mode according to your wireless client devices. It is
recommended to just leave it as default.
4. Click SAVE .
To Next Page
Loading...
