13
Note
2) Configure your IE browser.
Now, try to log on to the Web-based configuration page again after the above
settings have been configured. If you still cannot access the configuration page,
please restore your AP’s factory default settings and reconfigure your AP following
the instructions of this QIG. Please feel free to contact our Technical Support if the
problem persists.
For more details about Troubleshooting and Technical Support contact
information, please logon to our Technical Support Website:
http://www.tp-link.com/support/Support.asp
Select Never dial
a connection
Click OK
Open your IE browser, click
Tools tab and you will see
the following screen.
Click Internet Options
To Next Page
Loading...
