18
English
1. If you have an external antenna with the RP-SMA port, you could
connect it to the RP-SMA port of your CPE directly.
2. If you have an external antenna with N type port, you could connect it
to the TL-WA5210G with a pigtail cable. To protect your product, you
could also add a surge protector. The complete connection would be
simply illustrated as below.
Appendix 1: External
Antenna Installation
External Antenna Connection
1
The pigtail cable is used to change the N type port to RP-SM
type port.
Note
Configure the External Antenna
2
You will need to assign your computer a Static IP address within
the same range as the AP’s IP address. See the Appendix 2:
Troubleshooting - T3 if you need assistance.
Note
To Next Page
Loading...
