9
Chapter 2
Set Up Internet Connection Via Quick Setup Wizard
7. Follow the step-by-step instructions to complete the configuration.
8. Relocate the access point about halfway between your host router and the Wi-Fi
dead zone.
Tip: To maximize the signal strength, refer to the FAQ section.
9. Now, connect your devices to the access point wirelessly or via an Ethernet cable,
and enjoy the internet!
2. 2. 3. Client Mode
In Client mode, the access point connects your wired devices to a wireless network.
This mode is suitable when you have a wired device with an Ethernet port and no
wireless capability, for example, a smart TV, media player, or game console and you
want to connect it to the internet wirelessly.
Internet
Host AP’s SSID
A
B
OR OR
TV
Other
Wired
Devices
1. Connect the access point according to Step A to D in the diagram.
2. Power on the access point, and wait until the Power ( ) and Wireless ( ) LEDs are
lit and stable.
3. Use the default SSID and Password printed on the label of the access point to join its
Wi-Fi network.
4. Launch a web browser, and visit http://tplinkap.net. Create a password to log in.
Note:
If the login window does not appear, please refer to the FAQ Section.
To Next Page
Loading...
