14
Chapter 3
Customize Your Network
3. 1. View Network Status
1. Visit http://tplinkap.net, and log in with the password you set for the access point.
2. Go to Status. Click Refresh to get the latest network information of the access point.
3. 2. Change the LAN Settings
The access point is preset with Smart IP (DHCP), which allows the access point
to dynamically obtain an IP address and gateway from the main router/AP. It is
recommended to keep the default LAN settings to avoid IP conflict with the main router/
AP or other devices on your local network. If it is necessary to change the LAN settings,
for example, your network requires a specific IP subnet, follow the steps below:
1. Visit http://tplinkap.net, and log in with the password you set for the access point.
2. Go to Network > LAN.
3. Select Static IP, and set the IP address according to your needs, and then click Save.
To Next Page
Loading...
