21
Chapter 3
Customize Your Network
3. 6. Wireless Advanced
You can view or change advanced wireless settings if necessary. It is recommended to
keep them as default.
Note:
When working in Client mode, Wireless Advanced is not available.
1. Visit http://tplinkap.net, and log in with the password you set for the access point.
2. Go to Wireless > Wireless Advanced.
3. Configure the advanced settings of your wireless network and click Save.
Note:
If you are not familiar with the setting items on this page, it’s strongly recommended to keep the provided default values;
otherwise it may result in lower wireless network performance.
3. 7. Wireless Statistics
View the wireless statistics of currently connected devices.
Note:
When working in Client mode, Wireless Statistics is not available.
1. Visit http://tplinkap.net, and log in with the password you set for the access point.
2. Go to Wireless > Wireless Statistics to check the data packets sent and received by
each client device connected to the access point.
To Next Page
Loading...
