28
Chapter 4
Manage Your Access Point
3 ) (Optional) Enter the Ping Court/Ping Packet Size/Ping Timeout/Traceroute Max
TTL as needed. It’s recommended to keep the default value.
4. Click Start to check the connectivity of the Internet. The Diagnostic results will
display as below.
4. 3. SNMP Settings
Simple Network Management Protocol (SNMP) is a popular network monitoring and
management protocol. It allows management applications to retrieve status updates
and statistics from the SNMP agent with this device.
Note:
When working in Client/Range Extender mode, setting SNMP is not available.
1. Visit http://tplinkap.net, and log in with the password you set for the access point.
2. Go to System Tools > SNMP Settings.
3. Enable SNMP Agent and fill in the blanks as needed.
To Next Page
Loading...
