2
English
Login
Wireless Settings
dialog box will prompt you for the
User name and Password.Ente
the default values and click OK.
Note
If the dialog box does not pop up, please refer to T3 in Troubleshooting on
page 11 to assign a static IP address 192.168.0.100 for your computer. T2
will give you some help if you forget the password.
User name: admin
Password: admin
Click OK
Note
If the LEDs display abnormally, please check to see if all the cable
connectors (power adapter and Ethernet cable) are well connected to you
device.
fter successfully logging in, the
Quick Setup page will display.
Open your web browser, type in
192.168.0.254 in the address
bar and press Enter.
Click Next
To Next Page
Loading...
